K2 Snowboard Excavator
Alles over dit product
Eigenschappen wintersport
Niveau | Gevorderd - expert |
Profiel | Mix Camber Rocker |
Breedte snowboard (cm) | 26,8 (158cm) - 27 (162cm) |
Overige kenmerken
Flexibiliteit | Stijf |
Geslacht | Heren |
Montage systeem | Inserts |
Radius (m) | 6.3/7.3 (158cm) |
Terrein | All Mountain |
Vorm snowboard | Directional |
Productcode | E5BB3A0020 |
Productomschrijving
De K2 Excavator, genoemd naar het beoogde gebruik, is gespecialiseerd in het graven van diepe geulen op trimmers en het verplaatsen van poeder na een stormcyclus.
Gebouwd rond een bredere omtrek met een dual-radius sidecut, is de Excavator unisex in benadering en is geschikt voor gevorderde rijders, carvende trimmers en drijvend in poeder. Door het bredere profiel van de Excavator kunnen rijders ongeveer 5 cm kleiner worden dan hun gebruikelijke lengte zonder dat dit ten koste gaat van de prestaties. Deze extra breedte en 20 mm tapsheid komt ten goede aan rijders met grotere voeten, waardoor de teenweerstand bij diepe carves en lange traverses wordt verminderd.
Binnenin gebruiken we onze soepel buigende S1 Core om hem responsief en vochtig onder de voeten te houden. Ten slotte vullen we het met ons ICG 10 Biax Glass met tip-to-tail carbon stringers. Met deze technologie kunnen we het snowboard torsie ontspannen houden voor een gemakkelijke bochtinitiatie, maar het helpt om snap over de gehele lengte van het board toe te voegen. We hebben ook onze pre-cambered Carbon Power Forks in de staart toegevoegd om een ??energieboost in en uit bochten en die spontane "Slow Sign" ollies mogelijk te maken. Deze technologie is ingeklemd tussen een met was doordrenkte gesinterde 4001-basis, wasbare en uiterst duurzame P-Tex-zijwanden en een sneeuwafstotend SnoPhobic-bovenblad.
Technische eigenschappen
- S1 CORE:
NEW! S1 Core - Smooth flexing and durable enough to pack a five-year warranty, the S1 Core is made from three renewable species of timber - Bamboo, Aspen, and Paulownia. Aspen and Bamboo work together to highlight the snap and response of this wood and a Bamboo-dominant underfoot section at 30° to increase strength, supercharge the edge-to-edge response, and increase the pressure distribution along the edge. We’ve also placed lightweight paulownia in the tip and tail to help to reduce swing weight. - ICG 10 GLASS WITH CARBON:
Integrating Carbon Fiber stringers that run the length of the board into our fiberglass increases the snap of the snowboard without adding unnecessary rigidity. - SNO-PHOBIC TOP SHEET:
snowphobic topsheet
This top sheet material sheds unwanted snow build-up, keeping your snowboard light and nimble. - CARBON POWER FORK:
A pre-cambered carbon inlay in the tail of your snowboard gives the board energy in and out of turns and adds extra pop for takeoffs and landings. - HYBRITECH SIDEWALL CONSTRUCTION:
A K2 exclusive. By transitioning from a P-Tex sidewall into a capped construction in the tip and tail of our snowboards, we can reduce waste while giving our snowboards better energy transfer and making them more durable than our competitors. - WAX INFUSED SINTERED 4001 BASE:
Wax-Infused Sintered 4001 Base - Built using the hardest and fastest Sintered base material on the market from Crown, the Wax-Infused Sintered 4001 holds wax longer than other Sintered bases for a smoother glide, longer. - 2 X 4 INSERT BINDING MOUNTING:
2x4 Insert packs allow for secure binding mounting while optimizing stance-width options.
Time-tested, secure, and stable.
Klantreviews (0)
Inspiratie & advies
